spec no: dsah0991 rev no: v.3 date: jun/04/2007 page: 1 of 6 approved: wynec checked: allen liu drawn: y.l.li er p: 1101019822 oval solid state lamp preliminary spec attention observe precautions for handling electrostatic discharge sensitive devices part number: wp5603vgdl/sd/z green features z outstanding material efficiency. z reliable and rugged. z i.c. compatible. z rohs compliant. description the green source color devices are made with ingan light emitting diode. static electricity and surge damage the leds. it is recommended to use a wrist band or anti-electrostatic glove when handling the leds. all devices, equipment and machinery must be electrically grounded. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. lead spacing is measured where the leads emerge from the package. 4. specifications are subject to change without notice.
spec no: dsah0991 rev no: v.3 date: jun/04/2007 page: 2 of 6 approved: wynec checked: allen liu drawn: y.l.li er p: 1101019822 selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 the optical centerline value. 2. luminous intensity/ luminous flux: +/-15%. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1.wavelength: +/-1nm. 2. forward voltage: +/-0.1v. notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. 2mm below package base. 3. 5mm below package base. part no. dice lens type v iewing angle [1] min. typ. 2 1/2 wp5603vgdl/sd/z green (ingan) green semi diffused 2800 6000 100 (h) 50 (v) iv (mcd) [2] @ 20ma symbol parameter device typ. max. units test conditions peak peak wavelength green 525 nm i f =20ma d [1] dominant wavelength green 535 nm i f =20ma ? 1/2 spectral line half-width green 39 nm i f =20ma c capacitance green 65 pf v f =0v;f=1mhz v f [2] forward voltage green 3.2 3.7 v i f =20ma i r reverse current green 10 ua v r = 5v parameter green units power dissipation 111 mw dc forward current 30 ma peak forward current [1] 100 ma reverse voltage 5 v operating/storage temperature -40c to +85c lead solder temperature [2] 260c for 3 seconds lead solder temperature [3] 260c for 5 seconds
spec no: dsah0991 rev no: v.3 date: jun/04/2007 page: 3 of 6 approved: wynec checked: allen liu drawn: y.l.li er p: 1101019822 green wp5603vgdl/sd/z
spec no: dsah0991 rev no: v.3 date: jun/04/2007 page: 4 of 6 approved: wynec checked: allen liu drawn: y.l.li er p: 1101019822 packing & label specifications wp5603vgdl/sd/z
spec no: dsah0991 rev no: v.3 date: jun/04/2007 page: 5 of 6 approved: wynec checked: allen liu drawn: y.l.li er p: 1101019822
spec no: dsah0991 rev no: v.3 date: jun/04/2007 page: 6 of 6 approved: wynec checked: allen liu drawn: y.l.li er p: 1101019822
|
